Cheat Sheet: 11-speed Bluetooth Connection Mode
11-speed Di2 bikes do not have BluetoothLE and ANT functionality out of the box. An additional module, the D-fly or display is required.
If you have one of those modules, you can connect your bike to most bike computers by adding the bike as a sensor, and display the selected gears and battery info on screen.
To change settings or update firmware using the Android/iOS mobile app E-Tube Cyclist, you need to enter Bluetooth Connection mode.
You do so by pressing the main junction button (next to the charge port) for 0.5 - 2 seconds.
The LEDs will flash green and red while the bike is in Bluetooth connection mode (for about 30 seconds).
About the Author - BetterShifting Terry
I enjoy playing with bike tech - both bike building and wheel building, bike maintenance and of course, Di2. Besides writing content and working on the technical side of BetterShifting, I also work as a Software Developer in The Netherlands. Read more on the About this site page.
Support the site
If you want to support the site, consider using the site affiliate links, or buying me a coffee.
Comments
Was this page useful? Any questions? Leave a comment below and I'll get right back to you.